HOW TO USE
INSTALLATION OF SIDE HANDLE
1. Place side handle on the flat part of front end of the breaker.
2. Set washers with bolts. Screw the bolts with torque 3.5kgf・m (34.3N・m)
3. Make sure if side handle has been installed firmly.
1. DAILY INSPECTIONS
Check before each operation.
1. Check if there is any oil leakage from hoses or breaker itself.
2. Check if there is any crack or damage in tools.
2. PERIODICAL INSPECTIONS
Ask your dealer for the periodical inspections.
| Inspection Items | Operating Hours |
| Nitrogen gas charge in accumulator | 300 hours or 1 year |
| Replacement of accumulator diaphragm | 500 hours or 2 years |
| Replacement of Valve Rod O ring | |
| Replacement of U-cup packing | |
| Replacement of each O ring | More than 3 years |
* Accumulator Nitrogen gas pressure: 3.9MPa (40kgt/㎠)
